Clean drinking water is essential for good health, and having a reliable water purifier at home ensures that you and your family consume safe and contaminant-free water. SANAKY, a well-known brand in home appliances, offers high-quality water purifiers designed to provide clean and fresh drinking water. In this article, we will guide you through the process of using a SANAKY water purifier, covering installation, operation, maintenance, and troubleshooting.


Understanding the SANAKY Water Purifier


SANAKY water purifiers use advanced filtration technologies, including Reverse Osmosis (RO), Ultra Filtration (UF), and UV sterilization, to remove impurities such as bacteria, viruses, heavy metals, and chlorine. The purifier typically consists of multiple filtration stages, each designed to target specific contaminants, ensuring the highest water quality.


Step-by-Step Guide to Using a SANAKY Water Purifier


1. Installation Process


Proper installation is crucial for the optimal performance of your SANAKY water purifier. Follow these steps for a hassle-free setup:


  • A. Selecting a Suitable Location
  • Choose a flat and stable surface near a water source and an electrical outlet.
  • Avoid placing the purifier under direct sunlight or in humid environments.
  • Ensure there is enough space around the unit for ventilation and maintenance.


B. Connecting to the Water Supply

  • Attach the inlet pipe to the main water supply using the provided adapter.
  • Make sure the connection is secure to prevent leakage.
  • Open the water supply valve to allow water to flow into the purifier.


C. Electrical Connection

  • Plug the power cord into a compatible electrical socket.
  • Ensure the power supply is stable and meets the voltage requirements specified in the user manual.

2. Operating the Water Purifier


Once installed, using the SANAKY water purifier is simple and convenient.


A. Initial Rinse and Flushing

  • Before using the purifier for the first time, flush the system by letting water run for about 10–15 minutes.
  • This step removes any residual dust or carbon from the filters.


B. Dispensing Purified Water

  • Turn on the power switch to activate the filtration system.
  • Wait for the purification process to complete (usually a few minutes, depending on the model).
  • Press the dispensing lever or open the purified water tap to collect clean drinking water.


C. Monitoring the Filter Indicator

  • Many SANAKY water purifiers come with filter change indicators.
  • Regularly check the display or LED indicators to see if any filters need replacement.


3. Maintenance and Filter Replacement


To ensure the purifier continues to provide clean water, regular maintenance is necessary.


A. Cleaning the External Unit

  • Wipe the purifier with a soft, damp cloth to remove dust and stains.
  • Avoid using harsh chemicals or abrasive materials.


B. Changing the Filters
SANAKY water purifiers typically have multiple filters that need periodic replacement:

  • Sediment Filter: Replaced every 3–6 months.
  • Carbon Filter: Replaced every 6–12 months.
  • RO Membrane: Replaced every 1–2 years.
  • Post-Carbon Filter: Replaced every 12 months.


Steps for Replacing Filters:
1.Turn off the power supply and close the water inlet valve.
2.Remove the old filter by unscrewing it from the designated compartment.
3.Insert the new filter and secure it tightly.
4.Open the water inlet valve and allow water to flow for a few minutes to flush out any air bubbles.


C. UV Lamp Maintenance (If Applicable)

  • Some models include a UV lamp for sterilization.
  • Replace the UV lamp once a year or as recommended by the manufacturer.


4. Troubleshooting Common Issues
 

Despite regular maintenance, you may encounter some common issues. Here’s how to resolve them:


A. No Water Flow
Check if the water inlet valve is open.
- Inspect for clogged filters and replace if necessary.
- Ensure there is no disruption in the power supply.


B. Slow Water Flow
- If water flow is slower than usual, it could indicate a clogged filter.
- Check and replace the pre-filters or RO membrane if needed.
- Ensure adequate water pressure in the supply line.


C. Unpleasant Taste or Odor
- If the purified water has an unusual taste or smell, it may be due to an expired carbon filter.
- Flush the system thoroughly and replace the necessary filters.


D. Leakage Issues
- Tighten all connections and ensure that pipes are properly fitted.
- If leakage persists, contact customer support for professional assistance.


5. Tips for Optimal Performance

 

  • Use the Purifier Regularly: Stagnant water inside the filters may affect performance. Use the purifier daily to maintain efficiency.

 

  • Replace Filters on Time: Delayed filter replacement can reduce purification quality and damage the system.

 

  • Monitor Water Quality: If you notice changes in taste, color, or smell, perform maintenance checks immediately.

 

  • Store Purified Water Properly: Use clean, BPA-free containers to store purified water safely.

 

  • Schedule Professional Servicing: If you experience persistent issues, consider getting the unit serviced by a professional technician.


Conclusion


Using a SANAKY water purifier is a simple yet effective way to ensure access to safe drinking water. Proper installation, regular maintenance, and timely filter replacements are essential to keep the purifier functioning optimally. By following this guide, you can maximize the performance and lifespan of your SANAKY water purifier, ensuring a constant supply of clean and healthy drinking water for your household.

----------------------------------------------------------------------------------
SANAKY VIETNAM., CO LTD- Manufacturer of Power, Distribution and Dry-type Transformer as well as RO Water Purifier, Chest Freezer - Upright Cooler, ...
☎ Hotline: (+84) 986 484 544
? hank@sanaky-vn.com
? www.sanaky-vn.com